Standard Drivers and Controllers • NANOMOTION

XCDX5 Motion Controller

tuvia — Sun, 30 Jul 2023 04:03:23 +0000

The XCDX5 Motion Controller is a packaged drive & control that can support from 1 to 5 axes of operation. The XCDX5 uses Nanomotion’s XCD boards, which can be populated with up to 5 axes of HR or SE motor drive/control boards supporting up to 16 elements per axis. The XCDX5 can be controlled from a PC application, via Ethernet or USB, using the nanoCommander firmware, an external joystick or via XCDX5 scripts (xms file). The stand-alone XCDX5 operates from a 24VDC input and accepts digital encoder inputs.

הפוסט XCDX5 Motion Controller הופיע לראשונה ב-NANOMOTION.

The XCD Series Drive/Control (for Edge & Edge-4X Motors)

tuvia — Sun, 02 Apr 2023 04:18:51 +0000

Nanomotion’s XCD board is an OEM amplifier & control board designed for applications using the Edge and Edge-4X motors. The board level product replaces traditional amplifiers with a separate motion controller, as the XCD closes the loop and functions as a stand-alone drive and control. XCD-Edge is a single axis configuration designed to support Nanomotion’s low voltage motors with up to (4) Edge motors or (1) Edge-4X motor on an axis. The XCD is programmed via IIC communication, and can interface with Nanomotion’s nanocommander firmware, accepting quadrature encoder inputs.

הפוסט The XCD Series Drive/Control (for Edge & Edge-4X Motors) הופיע לראשונה ב-NANOMOTION.

AB7 Driver

tuvia — Sun, 02 Apr 2023 04:09:16 +0000

The AB7 amplifier is a single axis driver that can support up to 32 elements (up to 4 x HR8 or 4 x SE8 motors). The AB7 is designed to operate in a closed loop environment with an external motion controller closing the position loop and commanding the AB7 via +/-10v analog input. The AB7 supports ALL of the Nanomotion modes of operation, ranging from the standard AB1A mode, the linear AB5 mode, the low speed UHR mode and the ultra high resolution DC mode. All modes are user selectable. The AB7 supports all HR motor configurations and all SE motor configurations up to 32 elements.

הפוסט AB7 Driver הופיע לראשונה ב-NANOMOTION.

XCD2 Multi-Axis Controller

ron — Sun, 20 Nov 2022 13:39:22 +0000

XCD2 Multi axis amplifier & control board is a dual axis OEM amplifier and control board designed for applications using the Edge & Edge-4X motors.

Initial applications can pursue feasibility with our Evaluation Kit that has board level components that serves as a dual axis controller and can support a mixture of motor configurations. This can be a mixture of multiple Edge motors or multiple Edge-4X motors per axis. The XCD2 also supports Nanomotion’s gyro input for dual axis stabilization. The XCD2 is programmed via IIC and can support quadrature encoder input as well as BiSS.

OEM applications can be supported with either an XCD2 chip level solution that is integrated on customer boards, based on using our Reference Design for the processor and drive components.

Nanomotion can also support OEM applications with a custom board configuration, based on configuring single and multi-axis drive/control boards to a customer specification.

Contact us for more information

הפוסט XCD2 Multi-Axis Controller הופיע לראשונה ב-NANOMOTION.

AB1A Driver Amplifier

fullpowersupport — Tue, 22 May 2018 05:24:19 +0000

The AB1A amplifier is a single axis digital driver that can run one or multiple Nanomotion motors in parallel. While operating in a closed loop servo system, the driver works as a velocity amplifier, receiving a +/- 10 volt analog command from the controller. The controller signal translates into AC voltage at 39.6 kHz to run the motor. In an open loop mode the amplifier can receive a signal from an external joystick, providing motion in a continuous or stepping mode.

הפוסט AB1A Driver Amplifier הופיע לראשונה ב-NANOMOTION.

XCD Series Drive/Control (for HR & SE Motors)

fullpowersupport — Tue, 22 May 2018 05:21:36 +0000

Nanomotion’s XCD-HR or -SE board is an OEM amplifier & control board designed for applications using the HR or SE motors. The board level product replaces traditional amplifiers with a separate motion controller, as the XCD closes the loop and functions as a stand-alone drive and control. XCD is a single axis configuration designed to support Nanomotion’s high voltage motors with up to (16)HR or SE elements on an axis. The XCD is programmed via IIC communication, and can interface with Nanomotion’s nanocommander firmware, accepting quadrature encoder inputs.

הפוסט XCD Series Drive/Control (for HR & SE Motors) הופיע לראשונה ב-NANOMOTION.