AB Series Driver Amplifiers • NANOMOTION https://www.nanomotion.com/product-category/ab-series-driver-amplifiers/ A Johnson Electric Company Thu, 31 Oct 2024 12:14:43 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.5 https://www.nanomotion.com/wp-content/uploads/Picture1.pngAB Series Driver Amplifiers • NANOMOTIONhttps://www.nanomotion.com/product-category/ab-series-driver-amplifiers/ 32 32 AB7 Driverhttps://www.nanomotion.com/product/ab7-driver/ Sun, 02 Apr 2023 04:09:16 +0000 https://www.nanomotion.com/?post_type=product&p=4055The AB7 amplifier is a single axis driver that can support up to 32 elements (up to 4 x HR8 or 4 x SE8 motors). The AB7 is designed to operate in a closed loop environment with an external motion controller closing the position loop and commanding the AB7 via +/-10v analog input. The AB7 […]

הפוסט AB7 Driver הופיע לראשונה ב-NANOMOTION.

]]> The AB7 amplifier is a single axis driver that can support up to 32 elements (up to 4 x HR8 or 4 x SE8 motors). The AB7 is designed to operate in a closed loop environment with an external motion controller closing the position loop and commanding the AB7 via +/-10v analog input. The AB7 supports ALL of the Nanomotion modes of operation, ranging from the standard AB1A mode, the linear AB5 mode, the low speed UHR mode and the ultra high resolution DC mode. All modes are user selectable. The AB7 supports all HR motor configurations and all SE motor configurations up to 32 elements.

הפוסט AB7 Driver הופיע לראשונה ב-NANOMOTION.

]]> Standard and Vacuum Stageshttps://www.nanomotion.com/product/standard-and-vacuum-stages/ Mon, 05 Sep 2022 14:38:31 +0000 https://www.nanomotion.com/?post_type=product&p=973הפוסט Standard and Vacuum Stages הופיע לראשונה ב-NANOMOTION.

]]> הפוסט Standard and Vacuum Stages הופיע לראשונה ב-NANOMOTION.

]]> AB1A Driver Amplifierhttps://www.nanomotion.com/product/ab1a-driver-amplifier/ Tue, 22 May 2018 05:24:19 +0000 https://www.nanomotion.com/product/ab1a-driver-amplifier/The AB1A amplifier is a single axis digital driver that can run one or multiple Nanomotion motors in parallel. While operating in a closed loop servo system, the driver works as a velocity amplifier, receiving a +/- 10 volt analog command from the controller. The controller signal translates into AC voltage at 39.6 kHz to run the motor. In an open loop mode the amplifier can receive a signal from an external joystick, providing motion in a continuous or stepping mode.

הפוסט AB1A Driver Amplifier הופיע לראשונה ב-NANOMOTION.

]]> הפוסט AB1A Driver Amplifier הופיע לראשונה ב-NANOMOTION.

]]>