AB1A Driver Amplifier

SKU N/A Categories AB Series Driver Amplifiers, Motion Products Solutions, Standard Drivers and Controllers

The AB1A amplifier is a single axis digital driver that can run one or multiple Nanomotion motors in parallel. While operating in a closed loop servo system, the driver works as a velocity amplifier, receiving a +/- 10 volt analog command from the controller. The controller signal translates into AC voltage at 39.6 kHz to run the motor. In an open loop mode the amplifier can receive a signal from an external joystick, providing motion in a continuous or stepping mode.

Additional information

Power	E1, E16, E2, E32, E4, E8

Description

Digital drive handles up to 32 elements
+/- 10V input from servo control
2 optically isolated limits
Available in Eurocard 3µ format
Joystick input for open loop operation
Card interface is 48 pin 3 row connector

Mechanical Characteristics

Driving Capability: Up to 32 elements (4 x HR8 motors)
Analog Control Input
Input Voltage Range: +/- 10V
Input Impedance: 10KW
Input Low Pass Filter: 2.7KHz
Input Sampling Resolution: 10 bits

Performance Spaces

Physical Specifications

Nominal Mechanical Dimensions (WxDxH):150x110x40
Weight:450 gr.
Mounting options:Desk top/Wall mount

Electrical Specifications

Power Input: +48Vdc ± 5%
Max Motor Output: 270 to 280Vrms
Power Consumption without Load: +48Vdc/0.125A
Power Consumption with Max Load: +48Vdc/6.5Amax

Downloads

AB1A Driver/Amplifier User Manual

AB1A-3U Driver/Amplifier User Manual

Related Products

XCDX5 Motion Controller

The XCD Series Drive/Control (for Edge & Edge-4X Motors)

SE Motors

AB7 Driver